Gehl R190 Skid Loader

R190 Skid Loader

  • Height to Hinge Pin - Fully Raised: 3061 mm
  • Rated Operating Capacity: 862 kg
  • Gross Power: 51.7 kW
Find a Dealer Request More Info
Gehl R190 Skid Loader


With over 40 years of skid loader manufacturing experience, Gehl has taken performance to the next level with the R190 Skid Loader.

Net Power 51 kW
Maximum Torque 235 Nm
Rated Operating Capacity 862 kg

Operator's Cabin

The new R190 has a spacious operator station with plenty of adjustability and enhanced comfort features that users have come to expect from Gehl.

  • Large Level II ROPS/FOPS is standard equipment.
  • New side-folding restraint bar and adjustable armrests enhance operator safety and comfort.
  • Adjustable control pods (joystick and hand/foot configurations) and an optional air-ride seat deliver outstanding comfort.
  • Cab forward design enhances view to the bucket edge. Lowered rear towers improve visibility to the rear of the machine.
  • Extra-large side screens combined with Gehl PowerView® low-profile lift arm design provide a wide field-of-view to the side work areas.
  • Optional pressurized sealed cab enclosure with sound reduction material and rear-mounted air filter provide a cleaner, quieter, climate controlled operating environment.
Gehl R190 Cabin


Controls on the R190 incorporate intuitive design, state-of-the-art technology and plenty of options to suit the preference of any operator.

  • Four control options include T-Bar, Joystick, Dual-Hand, and Hand/Foot.
  • Auxiliary controls are located on the control grip in all control configurations for easy access.
  • Customizable integrated digital display provides coolant, fuel, battery, environmental and engine regeneration, and more information in real time.
  • Adjustable joystick control pods provide ease of operator control with minimal effort, reducing fatigue.
  • New upper-left and upper-right instrument panels provide easy readout and switch access.
  • Hydraloc™ system applies brakes whenever the operator raises the restraint bar, leaves the operator’s seat or switches off the ignition.


The R190 is equipped with a top-of-the-line Yanmar engine that provides the muscle needed to tackle demanding jobs with ease.

  • The DPF (Diesel Particulate Filter) system provides clean emissions without the need for additional fuel after-treatment additives.
  • The DPF requires regeneration to maintain optimal running conditions. This occurs passively as the machine is operated, but also requires occasional manual regeneration by the operator.
  • Regeneration is intuitively managed through the digital display and a clearly labeled rocker switch.
Make Yanmar
Model 4TNV98C-NMS Stage 3A
Net Power @ rpm 51 kW @ 2500
Maximum Torque @ rpm 235 Nm @ 1625
Displacement 3.3 L
Gehl Skid Steer R190 Engine Access


The R190 has amped-up hydraulic systems which incorporate intuitive design for precise controllability.

  • Impressive breakout forces deliver optimal digging and lifting performance.
  • Improved cycle times increase productivity on the jobsite.
  • Excellent ease of operation and proportionate flow adjustability are achieved with the auxiliary flow control rocker switch located on the control grip.
  • HydraGlide™ option helps keep material in the bucket and provides a smoother ride by allowing the bucket to float when travelling over rough terrain.
  • Hardened chrome cylinder rods resist pitting, rusting and scratching, extending the life of the cylinders.
Auxiliary Hydraulics - Standard 70 L/min
High-Flow Auxiliary Hydraulics - Option 119 L/min
Reservoir Capacity 30.3 L

Lift Arm

Gehl R190 Between the Tire Over the Tire

The R190 is built with a robust, radial lift arm that incorporates performance and durability.

  • Radial lift path offers enhanced performance in excavating, grading and digging below grade applications.
  • Selectable hydraulic self-leveling option keeps the bucket level throughout the lift cycle.
  • Between the tire design keeps the machine length short and compact.
  • Gehl PowerView® low-profile boom design offers optimal side-to-side visibility.


Excellent service access and quality components pair up to provide durable machines that are easy to maintain.

  • Oversized engine hood and rear door opens completely, exposing engine components and daily maintenance points.
  • ROPS/FOPS tilts up with the aid of gas struts for access to hydraulic components.
  • Drive chains and axle bearings are sealed systems that require no maintenance.
  • All high-rotation pins have grease points for ease of maintenance.
  • Features such as the remote oil drain and filter provide simple and easy maintenance access.



A  Overall Operating Height - Fully Raised 4013 mm
B  Height to Hinge Pin - Fully Raised 3061 mm
C  Overall Height to Top of ROPS 2032 mm
D  Ground Clearance to Chassis 165 mm
E  Overall Length with Bucket 3226 mm
F  Overall Length without Bucket 2388 mm
G  Wheelbase 1067 mm
H  Dump Reach - Fully Raised 572 mm
I  Rollback at Ground 26°
J  Dump Angle 42°
K  Overall Width 1689mm/1638 mmA
L  Bucket Width 1676 mm
M  Clearance Circle - Rear 1486 mm
N  Clearance Circle - Front without Bucket 1130 mm
O  Clearance Circle - Front with Bucket 2007 mm
P  Seat to Ground Height 991 mm
Q  Rollback at Specified Height 96°
R  Dump Height 2311 mm
S  Departure Angle 25°
Standard Specification Tire Size 10.00 x 16.5 HD


Make Yanmar
Model 4TNV98C-NMS Stage 3A
Gross Power @ 2500 rpm 51.7 kW
Net Power @ 2500 rpm 51 kW
Maximum Torque 235 Nm @ 1625
Displacement 3.3 L

Hydraulic System

Auxiliary Hydraulics - Standard 70 L/min
High-Flow Auxiliary Hydraulics - Option  119 L/min
Reservoir Capacity 30.3 L

Electrical System

Battery 950 CCA
Starter 3.0 kW
Alternator 95-amp


Rated Operating CapacityB 862 kg
Rated Operating Capacity with Optional CounterweightB 957 kg
Fuel Tank 62.5 L
Travel Speed - Maximum 12.1 km/hr
Travel Speed with Two-Speed Option - Maximum 20.1 km/hr
Operating WeightC - Approximate 3121 kg

A - Narrow width with off-set wheel option

B - Per SAE J818, SAE J732, and ISO 14397

C - Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 79 kg operator.

Gehl R Series R190 Specifications Diagram


Control Patterns

Gehl T-Bar Controls - Servo Optional
Hand/Foot Controls - Pilot Optional
Joystick Controls - Pilot Optional
Dual-Hand Controls Available Optional


Engine Auto-Shutdown System Standard
Engine Block Heater Optional
Turbocharged Engine


Auxiliary Hydraulics Standard
High-Flow Auxiliary Hydraulics Optional
Independent Hydraulic Reservoir Standard

Operator Station

Adjustable Arm Rests/Control Towers Standard
Heating Optional
Air-Conditioning Optional
Suspension Seat - Mechanical Optional
Air Ride Seat Optional
Cab Enclosure Optional
Foot and Hand Throttles Standard
Full Instrumentation Standard
Horn Standard
Integral Access Plate (Removable) Standard
Operator Restraint Bar Standard
ROPS/FOPS Level II Overhead Guard Standard
Sound Reduction Material Standard
Work Lights - Front and Rear Standard


All-Tach® Attachment Mounting System Standard
Power-A-Tach® Attachment Mounting System Optional
Anti-Vandalism Protection Standard
Back-Up Alarm Optional
Parking Brake Standard
Counterweight Optional
Hydraglide™ Ride Control Optional
Hydraloc™ Safety System Standard
Hydrostatic Drive - Servo Standard
Lift Arm Support Device Standard
Self-Leveling Lift Action Optional
Two-Speed Drive Optional


Gehl stands behind its products with a powerful warranty program. We know that Gehl equipment is put to the test each day, and we engineer and build our equipment to stand up to the challenges they face. To back up our commitment to quality, all Gehl equipment is backed by a twelve month warranty. An extended warranty is available for additional protection to your investment. Read more by clicking on the link to our warranty page below.

Gehl Warranty